Joined: 23 Jan 2017
Location: Yorkshire, UK
|Posted: Fri Jan 12, 2018 3:32 pm Post subject: Unresponsive FDS-E Radios (Ignore, problem disappeared)
My FDS-E Radios and XPDR seem to have a problem. They have stopped being detected by my main software (ProSim) or my own interface software that I developed prior to ProSim compatibility being available.
I can access the web portal into the interFaceIT ethernet controller and all of the radios and XPDR are listed in the sub-boards tab.
The IP address and related items all appear OK in the Network Settings Tab, and the host address of IIT-ECON-8 is accessible via web-browser.
However, ProSim has stopped detecting the hardware, and when I run my own interface software which I had previously used it also fails to connect.
I also cannot make a connection to the controller using a TelNet client through port 10346, which I had previously been able to do.
I have tried recycling the power, restarting the board, restarting the PC and doing a factory reset but no joy.
What should I try next?
Update: On switching the sim on again the following morning the problem had disappeared ; just one of those gremlins that sometimes happens I guess.