Search found 59 matches

by HowardChristian
Fri Jun 05, 2020 8:03 am
Forum: Open Discussion
Topic: Flaps.wav doesn't play?
Replies: 1
Views: 222

Flaps.wav doesn't play?

Using the Sim-A Sound Client I'm trying to get the Flaps.wav file to activate but it won't work for me. Mark said that it should play when flaps are >15 As I transition thru the flaps the Flaps1.wav, Flaps2.wav & Flaps3.wav activate ok. But when I reach Flaps 25, Flaps.wav (which is more like a flap...
by HowardChristian
Fri Jun 05, 2020 6:45 am
Forum: FDS Support
Topic: Rudder Trim Module Not working
Replies: 3
Views: 5163

Re: Rudder Trim Module Not working

Hi Dave,
No never did get it working, however turning the Trim Knob does actually trim the Rudder on the plane.
Just no needle movement on the Module.

Regards
Howard.
by HowardChristian
Tue Dec 10, 2019 7:57 am
Forum: FDS Support
Topic: Auto Pilot Disconnect Issue
Replies: 3
Views: 3023

Hi Steve, Thanks for your reply & I trust you are well. I have tried with & without the x but it was with a lower case x not X. Should that make a difference? This is what's in the Server FSUIPC I/O Interface. [FSUIPC_MULTI_FUNCTION] // Write 2byte(WORD) values to this offset to trigger pre-defined ...
by HowardChristian
Fri Dec 06, 2019 7:38 am
Forum: FDS Support
Topic: Auto Pilot Disconnect Issue
Replies: 3
Views: 3023

Auto Pilot Disconnect Issue

Hi, We have never been able to get the Auto Pilot to disconnect using the Push Button on the Yoke. It is recognised by FSUIPC & we have it mapped to Offset WordSet 53DB Parameter 551 via a Bodinar Card. The Auto Pilot Disconnect Bar on the MCP works fine which is using the MCP.exe program. Regards ...
by HowardChristian
Mon Oct 21, 2019 8:38 am
Forum: Open Discussion
Topic: FSUIPC WON'T RETAIN AXIS
Replies: 1
Views: 2199

FSUIPC WON'T RETAIN AXIS

In FSUIPC I move the Flaps Lever & it's detected in the Fsuipc Axis Tab & the numbers change & I can assign it. I select Send to FSUIPC for Calibration & I can Calibrate the Flaps (I use Detents option). Then I exit the Fsuipc setup. BUT when I go to the Axis Tab again & move the Flaps lever I find...
by HowardChristian
Fri Oct 11, 2019 9:35 am
Forum: Open Discussion
Topic: REVERSE Switches LOCATION on Revolution TQ ?
Replies: 0
Views: 2640

REVERSE Switches LOCATION on Revolution TQ ?

The Reverse Thrusters on my Motorised Revolution Sim TQ aren't working. I am not sure how long ago these stopped but could be a while. I do not know if it's the Switches not working from the card they're plugged into or if possibly a SIOC error. Is there anyone who knows the Rev'Sim TQ wiring & esp...
by HowardChristian
Fri Oct 11, 2019 12:44 am
Forum: Sim-Avionics Support
Topic: FLAPS Setup via Sim-A Help Please
Replies: 4
Views: 1461

Hi Michael,
No I didn't, but I will give that a try.
Exactly what does it filter out. Is it meant to remove spikes ?
by HowardChristian
Thu Oct 10, 2019 7:29 am
Forum: Sim-Avionics Support
Topic: FLAPS Setup via Sim-A Help Please
Replies: 4
Views: 1461

Thanks Mark, But no joy. I've followed your instructions but when I move my Lever I get VERY unreliable movement of the Flightsim Flap lever, which represents same in the Server. In the FSUIPC Axis Tab the numbers move unreliably yet they seem ok on the Flaps Calibration Tab. I know this make no sen...
by HowardChristian
Wed Oct 09, 2019 9:09 am
Forum: Sim-Avionics Support
Topic: FLAPS Setup via Sim-A Help Please
Replies: 4
Views: 1461

FLAPS Setup via Sim-A Help Please

FLAPS Setup via Sim-A Help Please Sim-A v1.93 RevolutionSim TQ. Fight Illusion Flaps Gauge. I want to setup my Flaps Lever to function via Sim-A & not FSUIPC. FSUIPC hasn't been reliable for me regarding the Flaps. Moving the Flaps Lever on my TQ does not change the setting in P3D or in the Server ...
by HowardChristian
Tue Nov 06, 2018 10:44 am
Forum: Sim-Avionics Support
Topic: TQ Trim Indicator Help
Replies: 8
Views: 4647

Stab Trim Indicators Initial Position & SimA Offsets?

Almost Working... I've got the Trim Indicators working. BUT I'm just not sure where the Trim Indicator should be positioned when FlightSim & the 737 aircraft is first loaded. Should the Indicator move to the Fully Nose Down position which is what it's doing at present or should I change it so that i...
by HowardChristian
Mon Nov 05, 2018 9:12 am
Forum: Sim-Avionics Support
Topic: TQ Trim Indicator Help
Replies: 8
Views: 4647

I may not have been very clear in my description. It is the Stabilizer Trim Indicators. These are the small POINTERS located above the Trim Wheels. One on each side of the TQ. It's not the Elevator Trim that I may have mislead. I know that if I run an unrelated to TQ SIOC script the motor doesn't tu...
by HowardChristian
Sun Nov 04, 2018 7:54 am
Forum: Sim-Avionics Support
Topic: TQ Trim Indicator Help
Replies: 8
Views: 4647

TQ Trim Indicator Help

I am having trouble with my TQ Elevator TRIM INDICATORS. I don't know if it's a SIOC SCRIPT error, a SIM-A Setting or a FSUIPC Offset somewhere? The issue is that Motor driving the Trim INDICATORS on the TQ (Revolution-Sim TQ) is constantly turning. This forces the indicators to the Full Nose Down p...
by HowardChristian
Fri Oct 26, 2018 8:39 am
Forum: FDS Support
Topic: Rudder Trim Module Not working
Replies: 3
Views: 5163

Rudder Trim Module Not working

I have the FDS Rudder Trim Module & the Trim_Module.exe v1.0 but is not working. This used to work fine. I've tried reInstalling several times with no luck. Hoping someone maybe able to assist please. I follow the Innstructions exactly. The Module is Detected & I can assign the Serial No ok. But wh...
by HowardChristian
Fri Oct 26, 2018 7:14 am
Forum: Open Discussion
Topic: REVOLUTION SIM TQ Stab Trim Needle Not Working
Replies: 0
Views: 2282

REVOLUTION SIM TQ Stab Trim Needle Not Working

The above refers to the Stab Trim Needle Not Working.
by HowardChristian
Fri Oct 26, 2018 7:11 am
Forum: Open Discussion
Topic: REVOLUTION SIM TQ
Replies: 2
Views: 3522

REVOLUTION SIM TQ Stab Trim Needle Not Working

I forgot to include the Sioc.ini file, attached below. [ fichero de configuracion para el SIOC ver. 5.0 ] [ Configuration file for SIOC ] [************** SIOC ***************] [ Nombre asignado al SIOC ] [ SIOC name ] Name=MAIN_SIOC [ Puerto del servidor IOCP ] [ IOCP port ] IOCP_port=8092 [ Tiempo...