Search found 956 matches

by MarkHastings
Wed May 20, 2020 4:58 am
Forum: Sim-Avionics Support
Topic: IAS Diasgree alert (Resolved)
Replies: 3
Views: 237

Re: IAS Diasgree alert (Resolved)

It was a weirdy in that beta.
I made some changes to way the IRS L and R parsed it's values and there were a couple of typos.
by MarkHastings
Mon May 11, 2020 6:17 am
Forum: Sim-Avionics Support
Topic: P3D V5 & Elevator Trim Up/Down (Resolved)
Replies: 5
Views: 360

Re: P3D V5 & Elevator Trim Up/Down

FSUIPC6 is still in the \Modules folder.
Nothing has changed from that point of view.

If you don't see a \Modules folder in your P3D installation, then I would guess that you haven't installed FSUIPC6 correctly.
by MarkHastings
Fri Apr 03, 2020 6:22 pm
Forum: Sim-Avionics Support
Topic: A\P disconnect sound coming on. ( RESOLVED )
Replies: 15
Views: 6872

Update and a quick fix for this. It looks like an oil temp overheat was triggering a master warning. This is obviously being incorrectly triggered and I’m correcting it. (Not sure exactly which beta it appeared in) The quick solution is to go into the Server > Aircraft Details > Engine Details Inc...
by MarkHastings
Fri Mar 27, 2020 6:13 pm
Forum: Sim-Avionics Support
Topic: MCP altitude error
Replies: 15
Views: 7727

I haven’t uploaded the ISFD correction yet.
It’ll be bundled with a few other items.
by MarkHastings
Thu Mar 26, 2020 2:44 pm
Forum: Sim-Avionics Support
Topic: A\P disconnect sound coming on. ( RESOLVED )
Replies: 15
Views: 6872

Can you confirm that : \Windows\SYSWow64\AVIONICS_IPC_dll is the same file as \Sim-Avionics\TCP_Client\AVIONICS_IPC.dll If these system dll didn't get updated the internal structures will be incorrectly mapping and you will see unpredictable results. I'm making constant test flights and currently I'...
by MarkHastings
Thu Mar 26, 2020 2:23 pm
Forum: Sim-Avionics Support
Topic: MCP altitude error
Replies: 15
Views: 7727

ok Thanks.. I've corrected the ISFD now too.
by MarkHastings
Tue Mar 24, 2020 8:17 pm
Forum: Sim-Avionics Support
Topic: V1.964 LNAV (737NG) TOO AGRESSIVE (Resolved)
Replies: 12
Views: 6641

That’s correct - bank angle limit only limits the bank angle in hdg sel mode.
by MarkHastings
Tue Mar 24, 2020 10:57 am
Forum: Sim-Avionics Support
Topic: V1.964 LNAV (737NG) TOO AGRESSIVE (Resolved)
Replies: 12
Views: 6641

This would be controlled by the
"Turn Aggression" and "Roll Accel Control" values.

Typical values would be 12000-15000
by MarkHastings
Tue Mar 24, 2020 10:54 am
Forum: Sim-Avionics Support
Topic: v1.964 Battery switch B777 OVH - (Resolved)
Replies: 8
Views: 3996

That is the normal start up procedure for the 777. (It's different to a 737) From 'Cold and Dark' BATTERY Switch ON - Nothing happens except a couple of OH switch lights come on) The Aircraft requires an AC power source to begin it's startup sequence. With the Battery ON you can now start the APU. A...
by MarkHastings
Tue Mar 24, 2020 10:33 am
Forum: Sim-Avionics Support
Topic: Entering hold details
Replies: 12
Views: 4922

The correct procedure would be to initially go direct to SARRA. You can then goto the HOLD page and amend the SARRA hold details with the new inbound course / Turn / Alt and the EFC (Expect Further Clearance) time etc. NEXT HOLD is used to 'Add another hold' When it's time to exit you would leave as...
by MarkHastings
Tue Mar 24, 2020 7:00 am
Forum: Sim-Avionics Support
Topic: ANTI SKID (Resolved)
Replies: 4
Views: 2068

Anti Skid system requires AC Power.
So the light will come on with just Battery Power.
by MarkHastings
Tue Mar 24, 2020 6:18 am
Forum: Sim-Avionics Support
Topic: MCP altitude error
Replies: 15
Views: 7727

1.966C dev version is online. V1.966C There was a mistake in 1.966b While expanding the system logic detail, I'm now separately simulating values from IRS L + R, and these values are sent to the respective pilot displays (based on the IRS Selector). The correct values are also sent to the FMC and A/...
by MarkHastings
Tue Mar 24, 2020 6:09 am
Forum: Sim-Avionics Support
Topic: Low Pressure Indicators (Resolved)
Replies: 6
Views: 2885

The 737 Fuel system now has the Nitrogen Generating System (NGS) option. This removes the oxygen component from the centre fuel tanks, drastically reducing the flammability risk. This allows all of the fuel in the centre tanks to be used. Server > Aircraft Detail > Aircraft Options > Fuel NGS Fitted...
by MarkHastings
Thu Feb 20, 2020 1:27 pm
Forum: Sim-Avionics Support
Topic: EXTERNAL EXCEPTION E0434352
Replies: 3
Views: 1958

Is this just on one of your computer ? Have you just rebuilt it ? That type of msg is usually .NET problem and displayed when the FDS TQ plugin tries to load with incorrect Phidgets drivers installed. Ensure your computer has the latest .Net installed. Ensure the Sysboard Controller Plugins are disa...
by MarkHastings
Fri Feb 07, 2020 7:52 am
Forum: Sim-Avionics Support
Topic: EFIS MINS not visible on PFD
Replies: 7
Views: 2814

Check:
Server > Aircraft Details > Aircraft Options : Minimums Operation.
Ensure that you have selected "Independent MINS" (and Baro)

On the Server > Control Panel : FSUIPC Interface section.
Unless you have specific requirements to use the FSUIPC IO, all of the checkboxes should be OFF.