Blue Annunciator resistor value (Resolved)

This Forum is designed to support and assist in the use of any/all FDS related Interface products.

Moderators: Curtis, Jetcos

Post Reply
Karl737
Posts: 53
Joined: Mon Jan 12, 2009 8:57 pm
Location: Woodvale near Bendigo, Australia

Blue Annunciator resistor value (Resolved)

Post by Karl737 »

Hi guys,

Just wondering what value resistor to use on blue dual state AN1 annunciators and also, any specific diodes that are best?

Also, is there a link anywhere to a circuit drawing for the dual state annuns. I found one in the forum, but the page is no loger active.

Cheers,
Karl

EDDM
Posts: 6
Joined: Mon Dec 06, 2010 7:10 am
Location: Germany

Post by EDDM »

Hello Karl,

the resistor is 1/4 Watt 1000 Ohm. I still have have the circut drawing (JPEG). I already did it with this resistor and it works. If you post your eMail, I will send you the drawing by eMail.

BR

Steffen
Germany - B737NG

GDR
Posts: 338
Joined: Fri Sep 26, 2008 3:16 am
Location: EBBR
Contact:

Post by GDR »

Hello Karl,

Maybe it is the reference to my site that doesn't work anymore. If so, can you give me the topic. Then I'll correct it. My website has been undergoing changes.

Never the less, here is the new link: http://www.flightsim737ng.be/fdsforum/A ... ctions.pdf :wink:

Geert
Geert.

Full B737-MAX DSTD - ALL FDS
Sim-Avionics V1.965
P3D v4.5.13.32097
FSUIPC v5.154

What goes up, must eventually come down!
http://www.flightsim737.be
http://www.flightsim737max.be
http://www.flightsim737ng.be

Karl737
Posts: 53
Joined: Mon Jan 12, 2009 8:57 pm
Location: Woodvale near Bendigo, Australia

Post by Karl737 »

Thanks guys,

I opened my email this morning and Steve has kindly sent me the drawing. :)

Gert, the link I tried was in Interface Products: Dim/bright led when testing http://flightsim737.dyndns.org:8081/Doc ... V2_PCB.pdf

Cheers,
Karl

Post Reply