B737NG-Elec-Cab Sys

This Forum is designed to support and assist in the use of any/all FDS related Interface products.

Moderators: Curtis, Jetcos

Post Reply
baw028
Posts: 67
Joined: Thu Apr 20, 2006 12:07 pm
Location: UK

B737NG-Elec-Cab Sys

Post by baw028 »

Hi,

Just connecting my FDS Elec-Cab Sys cards. Can anyone tell me which 8 pin ribbon connector on the cabin pressure displays goes to what 8 pin connector on the main Elec-Cab board.

Thanks Roger

pcos
Site Admin
Posts: 2285
Joined: Mon Nov 03, 2003 8:39 am
Contact:

Post by pcos »

Roger,
Please email me and I will send you some documentation.
Peter
____________________
Peter Cos
President
Flightdeck Solutions (FDS)

baw028
Posts: 67
Joined: Thu Apr 20, 2006 12:07 pm
Location: UK

Post by baw028 »

Hi,

Is it possible to change the way a switch operates.
My battery switch which I have just connected to my FDS Elec-Cab Sys is positioned in the panel the wrong way round and so turns the overhead panel off when it should be on. I can turn the switch but it means filing the little mounting knob on the panel.
Just wondered if anyone else has come across the same problem.

Cheers Roger

Jetcos
Posts: 1266
Joined: Fri Sep 30, 2005 2:42 pm
Location: Newmarket,Ontario
Contact:

Post by Jetcos »

You can reverse the offset.

Open the Battery Switch assignment and use the + sign to open the offsets. Change the offset.

What software are you using?
Steve Cos
Vice President and Tech Support
Flightdeck Solutions (FDS)

baw028
Posts: 67
Joined: Thu Apr 20, 2006 12:07 pm
Location: UK

Post by baw028 »

Hi Steve,
Thanks for the reply.
I am using Project Magenta
I have been assembling my overhead for what seem likes ever and have finally started to connect to a Fds sys 1board. Hopefully I shouldn't have to many problems.

Thanks Roger

Post Reply