FDS-SYS1-XT LEDs and resistors?

This Forum is designed to support and assist in the use of any/all FDS related Interface products.

Moderators: Curtis, Jetcos

Post Reply
Mk882004
Posts: 6
Joined: Wed Jul 13, 2016 7:26 pm

FDS-SYS1-XT LEDs and resistors?

Post by Mk882004 »

So I've been scrolling through the posts lately and I see some things that have me questioning. I'm currently building my overhead and planning my next steps. Some of the things I read say that resistors are not required with the FDS boards. However, the new SYS1 board is ran with a 12v power supply. Are the LED outputs still 2.2v? Or are resistors going to be required with the new boards?

Thanks guys

pcos
Site Admin
Posts: 2286
Joined: Mon Nov 03, 2003 8:39 am
Contact:

Post by pcos »

No resistors are required. Built into the SYS boards.
Peter
____________________
Peter Cos
President
Flightdeck Solutions (FDS)

Mk882004
Posts: 6
Joined: Wed Jul 13, 2016 7:26 pm

Post by Mk882004 »

That is very convenient, thank you for the answer Peter!

Post Reply